Hp deskjet 460 User Manual

Download hp deskjet 460 This hp deskjet 460, The only warranties for HP products and services are set forth in the express warranty ... Point to HP Deskjet 460 Series, and then click HP Deskjet 460 Series ... for the complete detail download hp deskjet 460

readmore..

Samsung ML-1660 O.S.vision firmware v1.20.00.34

Samsung ML-1660 O.S.vision firmware v1.20.00.34
1) download files here
2) unzip folder
3) make sure printer is connected to computer via USB cable
4) take out toner cartridge and place scotch tape over chip
5) reinstall toner cartridge in printer
6) drag and drop ML1660 file onto usblist2 file (this runs program)
7) wait 1 minute
8) restart printer

readmore..

Samsung ML-1660 Reset Procedure

Samsung ML-1660 reset

Instructions for completion printer.

1. Connect the printer to the computer and turn it on.
2. Print report printer. In 164H, press and hold three to five seconds, press the cancel button. Until the printer are flashing lights.
3. Consider the printout. We are interested in line OS Version. It spelled out the printer firmware version. Looks like this (OS Version 1.01.00.HH)
9. Turning off the computer all USB devices except mouse and treated printer.
10. Run the program firmware f16xx.exe
11. Select the device and firmware version and click the appropriate button. (Say V.30 path firmware)
12. Appear dos window and it will run the point.

readmore..

Got Msg Ink System Failure in HP C7280

A. - Press and hold the #*# key.
B. - Press the ### key and release both keys.
Display should say #Enter Special Key Combo#
C. - Press and release in sequence the #1#, #2# and #3# buttons.
Display should say #Support# and display the FW rev (something like R0631R)


1. Press and release the right arrow button until the display says #System Configuration Menu#.
2. Press and release the #OK# button.
3. Display should say #Hardware failure status#. If not there already, Arrow Key over to #Hardware failure status#,

readmore..

Getting error - 6A00 on Canon Pixma ip4000

1. Turn off the printer
2. Open cover
3. Print head and cartridges manually move to the left
4. on the extreme right is a white plastic cover is visible, which is attached to a spring
5. Clean the cover carefully (no chemicals, not wet) and gently push it back (it clicks) and remove any impurities -> the black collecting sponges for the storage of the print head can see
6. Print head and cartridges manually back to the right move
7. Turn on printer

readmore..