Described at HP website, HP Officejet 6500A / E710a e-All-in-One Printer comes with 2.36″ touchscreen to print, can using for Print, copy, scan, and fax, ENERGY STAR qualified model, Get maximum speeds of 32 pages/minute, Fax fast, at up to 33.6kpbs, Streamline large jobs with the 35-page automatic document feeder and 250-sheet paper tray, Quickly fax, Print ID cards, Stay connected and share resources using the built-in Ethernet and more.
Wednesday, May 23, 2012
The only reason turning over the rubber on the feed wheels is because they are clean on the other side! Clean off the paper dust and they will feed with no problems. Also, the pinch rollers under the toner cartridge are as smooth as glass. Do you really expect them to grab the paper and pull it through the printer?? HELL NO!! Take a piece of sandpaper and rough up the top pinch rollers. Don’t go crazy, just remove the glossy glaze so that they can grip the paper a little better. Also, notice that there is a paper stop between the pinch rollers.
Clean the carriage rail. This is the round chrome piece that the carriage assy that holds the cartidges rides on. Use a paper towel that is slightly moist.
Be sure to not force anything. Unplug the printer after you get the carts in the middle. Move them to one side and clean and then move them to the other and repeat.
1: Press MENU/SET then push *2864 to enter maintanence mode. (All the buttons (yellow lights) on the mfc 210 should light up. eg: photo capture, copy, fax, scan buttons; they should all blink at the same time!)
2: Press 80 and scroll (with arrow buttons) to PURGE. If over
6000 count, push 2783.
3: Then Press 99 to exit maintanence mode. OR push stop/exit button, then the power save button.
Here’s the definitive reset. It will work on the following models: ImageRunner 1200/1300/1310,1330,1370,1630,1670, PC1060/1061/1080F, ImageClass D620/D660/D661/D680/D681/D880
Press Additional Functions key
Press > to #7 Printer Function
Press > to #4 Printer Reset
Unplug printer and repower it.