Reset MX330 Ink Cartridge Counter

1. Refill cartridge and install back to printer.
2. Open Properties in "Printers" from "Start Bar"-"Settings" on left lower corner.
3. Open "Advance".
4. Uncheck "Enable advanced printing features".
5. Apply and close.
6. Hold "Stop" button on MX330 printer for 10-20 seconds. The "Ran out of ink" message will disappear.
7. Open "Properties" in "Printers" again as in Step 2.

readmore..

Epson Tool Icon C-92 Resetter

Here's Standardization System for Epson Tool Icon C-92. See the drill teaching Resetter Printer Epson C92.
Guide instruction for resetting machine

Alter on machine
Susceptible autorun.bat to set the appointment to 13 july 2007
Run adjprog.exe from the extracted folder
Clack tolerate

readmore..

Resetting okidata toner drum worked

1. Turn machine on while pushing and holding the TWO up/down menu buttons at same time.
2. Menu window will show "OKI USER"
3. Scroll to " Engine Dialog Mode" is indicated. Push Enter button.
4. "Diagnostic Mode xx.xx.xx S-Mode is indicated.
5. Scroll to "NV-Ram initial" is indicated. Push ENTER.
6. Window shows "NV-Ram- Initial Table 1".
7. Push ONLINE and ENTER Buttons simultaneously and HOLD for 10 seconds after you see "Executing Reset" appear in menu window.

readmore..

Download Driver Canon lbp660

Download Driver Canon lbp660
got to this link http://support.canon.de/produkte/drucker/lbp660/lbp660_sw.htm

readmore..

Brother toner cartridge MFC-7820N ( TN-350)

1. open front cover
2. while front cover is open and machine is on, push "options"
3. push start
4. (quickly) type in '1' then '0' (typing in "10") . if you are not quick enough in this step, start from the beginning
5. the machine says 'accepted'
6. toner goes and goes

readmore..