Resetter printer hp D1360

All brands HP Printer resetternya there is no software.

How to Reset HP Printer
Problem: HP Printer blink after most had diseases with replaceable cartridge. So at some point the printer will not be replaced even with a new cartridge. This blink problem has frequently occurred in HP.Cara reset the printer:
1. Enter the catridge which is considered good (the printer still blink condition)
2. Turn off the printer
3. Press and hold power button until the head and then move off
4. If the good catridge direct blink lost. The printer has been used interchangeable.


How to reset HP cartridges:
1. First cover with cellophane tape catridge titik2 on the color blue. (How many points are closed depending on the type catridge)
2. Open the lid and then input the printer catridge in the printer. Close again
3. Normally the printer directly not blink
4. Go back and pull the tape catridge attached
5. Close titik2 Green with colored duct tape
6. Open the lid and then input the printer catridge in the printer. Close again
7. Go back and pull the tape catridge attached
8. Catridge can now be used.