Wednesday, February 4, 2009

Canon Pixma iP4300

Canon Pixma iP4300The Pixma iP4300 is fast, its print quality is good, and it has some nice features. Though it does suffer from a few design shortcomings, we recommend it highly.

The Pixma iP4300 set records in all of our speed tests, blasting through ten pages of text at a rate of 11.9 pages per minute. Graphics and photos also printed at a fast pace.

Its print quality showed the advantages of its five-ink design, which uses cyan, magenta, yellow, black, and pigment-black cartridges. The last of these inks helped produce black and mostly precise text output. Photos looked bright and natural on glossy paper, but on plain paper the same images looked a bit grainy and had some banding. Grayscale photos appeared a little rough, and diagonal or curved lines seemed slightly jagged.

The Pixma iP4300 has automatic duplexing (allowing for two-sided printing)--a great bonus for a photo printer at this price. It comes with two 150-sheet input trays, one vertical and one flat-mounted underneath. To designate which tray to use, you press a slim button on the front control panel; next to it, a lighted diagram confirms your choice. The supplied output tray can hold 75 pages.

This printer combines useful features and solid performance, but the design seems intended for sharp-eyed people only. Controls are labeled with small, unintuitive icons that do not clearly indicate their functions. Markings for the PictBridge port and the flat-mounted input tray are in almost the same color as the surrounding plastic, which makes them hard to read.

Though printed and HTML-based documentation for this printer is generally good, the Easy Setup Instructions poster doesn't always make things easy. It assumes that you know what and where all the parts are (for a detailed explanation, you must consult the HTML-based guide). An illustration of how to adjust the paper size in the tray mounted beneath the printer fails to explain how all the sliders work--and they're tricky.

Canon throws in some useful bundled software. Easy-PhotoPrint and PhotoRecord let you edit, organize, and print digital photos. Easy-WebPrint helps you format and print Web content so it doesn't run off the page.

The Pixma iP4300 has it all: speed, impressive output quality, and a good price.

readmore..

Canon PIXMA MP800 Error 6A00

Canon PIXMA MP800 Error 6A00

-Remove a piece of paper that was stuck in the printer
-pushed down on sponges
-moved ink cartridge holder back and forth several times
-unplug printer completely
-removed all the ink cartridges and put them back

The Problem
1. The print head cartridge keeps locking itself up on the right hand side.
2. Frequent 5100 errors even when the printer is on standby
3. Even when I wipe up the print cartridge, the next print will mess up the bottom of the print cartridge with ink again.

readmore..

Reset reset Canon PG40 PG41

Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice Power off
Next time the printer is started the waste count will have been reset

from dsacme.blogspot.com

readmore..

Canon S900, S820, S750, S520 reset printer

Canon S900, S820, S750, S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

readmore..

Canon MPC190 Reset Waste Ink

Canon MPC190 Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF]

readmore..